INOR MINIPAQ-HLP Low Profile Programmable 2-wire Transmitter for RTD and T/C
- $202.00
MINIPAQ-HLP is a basic, non-isolated, easy-to-use 2-wire transmitter for in-head mounting in DIN B and similar heads.
Reduced hight simplifies mounting in low connection heads.
Configuration is made in seconds with the user friendly Windows software, MINIPAQ Soft. No external power is needed.
MINIPAQ-HLP is programmable for RTD’s in 3- and 4-wire connection as well as for 11 T/C types. Useful error correction functions improve the accuracy
Measurements with RTD’s in 3- and 4-wire connection MINIPAQ-HLP accepts inputs from a number of standardized RTD’s such as Pt100, Pt500 and Pt1000 acc. to IEC 60751 (α=0.00385), Pt100 acc. to JIS C 1604 (α=0.003916) and US standards (α=0.003902), Ni100 and Ni1000 acc. to DIN 43760 as well as Ni120 and Cu10 acc. to Edison curves. 3- and 4-wire connection can be selected.
Measurements with Thermocouples MINIPAQ-HLP accepts inputs from 11 types of standardized Thermocouples. For T/C input, the CJC (Cold Junction Compensation) is fully automatic, by means of an accurate measurement of the terminal temperature. Alternatively, the CJC can be disabled.
Temperature linear output Fully temperature linear 4-20 mA output for RTD’s and Thermocouples.
Designed for harsh conditions Rugged design tested for 10 g vibrations.
NAMUR compliant Output limitations and fail currents according to NAMUR recommendations.
Sensor matching and error corrections for maximum accuracy A matching to a calibrated temperature sensor can easily be performed with the Sensor Error Compensation function. The System Error Compensation is a convenient way to adjust the sensor/transmitter combination (or just the transmitter) for highest accuracy in a certain measuring range.
Mounting, wiring and testing MINIPAQ-HLP is designed to fit inside connection heads type DIN B or larger. The large center hole, dia. 7 mm / 0.28 inch, the robust terminals with test connections and the low hight greatly simplify the mounting, wiring and testing procedure.
Configuration without external power Edit or read the configuration off-line by just connecting to the USB port of a PC.
MINIPAQ Soft, easy-to-use Windows configuration software The simple and user friendly software, MINIPAQ Soft, is used for transmitter configuration in seconds. In one window all parameters are set, such as sensor type, measuring range, filter activation, CJC, sensor failure action, error corrections etc.
The Standard lead-time is about 4-6 weeks.
Please Click Here for more detail in INOR website